Environmental solution requirements for Auto die cutting machine with stripping
Auto die cutting machine with stripping is a key machine and equipment for post-press packaging production and processing. It is mainly used to cut relative printed matter or cardboard into required boxes.
In order to exceed the purpose of environmental protection, energy saving and automatic control system, the given technical transformation project plan is selected:
1. The Auto die cutting machine with stripping mainly consists of the feeder part, the die cutting part, the waste removal part and the paper delivery part.
2. When the waste removal centrifugal fan is working, check the paper type data signal according to the photoelectric switch set on the transmission equipment, and feedback the data signal feedback to the PLC control board, and the PLC control board will send out commands to operate the waste removal centrifugal fan.
3. After the photoelectric switch detects the paperless data signal, the PLC control board outputs the data signal to control the low-speed operation of the DC variable frequency inverter of the waste cleaning centrifugal fan, so as to maintain the adjustment of the exhaust air volume of the waste cleaning centrifugal fan according to the specific situation.
4. When the paperless data signal is detected within 5 minutes (this time can be independently adjusted according to the production status), the waste removal centrifugal fan stops operating. The use of die cutting machines involves more than ten manufacturing industries such as daily necessities, printing and packaging, medical dressings and their electronic equipment.
Its performance requirements are high, and the key is reflected in the following aspects:
1. The upper and lower roll dies of Auto die cutting machine with stripping should have high wear resistance and long service life.
2. Auto die cutting machine with stripping maintains the reliability of laser cutting of commodities under high-speed operation. At this stage, the operating speed of relatively excellent machines and equipment is usually 300m/min.
3. The upper and lower rollers of Auto die cutting machine with stripping have the necessary regrinding frequency, usually 15 times.
Among them, the key factors affecting the service life of the upper and lower roll molds are:
1. The raw materials of Auto die cutting machine with stripping upper and lower roll dies are selected from superhard materials such as high chromium steel, front steel, powder high-speed steel and tungsten steel. The performance of different raw materials and heat treatment methods determine the upper and lower roll dies Wear resistance.
2. The higher the manufacturing precision of Auto die cutting machine with stripping the upper and lower roll dies and the die-cutting tool holder, the longer the service life.
(The above is a detailed introduction to the performance of the automatic die-cutting machine and some regulations for production.)
Auto die cutting machine with stripping improves each position and the actual effect shows:
1. Change the curves of the main power cam gallery of the die-cutting machine, which can get rid of the vibration of the intermediate transmission system of the camshaft and crankshaft, thereby improving the equipment speed.
2. Production and processing of the four crankshafts and its; narrow dimensional tolerances are used in the whole process of connection and cooperation to reduce the gap, which can improve the moving unit root inspection of the fixed structure of the waste removal organization.
Shandong Lukes Machinery is one of the leading brands of Auto die cutting machine with stripping in China, with a professional technical team and after-sales personnel. Cooperative customers are located in dozens of countries around the world, and some countries have established regional agents.
If you are interested in our products, please contact us.
